Fanuc 0i TF Graphic Screen

[aefjutor]

Hello guys. I have some strange problem. I have 2 machines with same operation system but the screen of graphic is different. I think something with the parameters or with some not activated option.
Any suggestions?

Similar Threads:

• Need Help!- Fanuc 0i-TC CRC ERROR! while LOADING GRAPHIC SYSTEM.
• Fanuc graphic
• OKK FANUC 10M CRT SCREEN
• Need Help!- Fanuc 18T CRT Screen
• MD1 Graphic screen

[sinha_nsit]

Use the same graphic parameters on the two machines, for the same job. Usually, default values are good enough.