macro display

[aliaghaei]

Hi every one,
On fanuc 18i , in OFFSET/SETTING SCREEN when perss rightmost soft key { > }, display don't change and Macro variables display screen don't appear !!!
How i can enable Macro variables display screen?
many Thanks,

Similar Threads:

• Question Help me improve this custom macro, also freebie chip breaker macro for lathe
• Display macro values on screen
• Help me improve this custom macro, also freebie chip breaker macro for lathes
• Need Help!- Fanuc OM - How do I display the tool change macro?
• Testing program for Macro (Fanuc Macro B)

[kamalcnc]

Ok

[kamalcnc]

Check u r parameter options

Sent from my Lenovo A6020a46 using Tapatalk

Sent from my Lenovo A6020a46 using Tapatalk

[sinha_nsit]

Execute #1 = 10; in MDI mode.
If it alarms out, macro option is not available on your machine.

[memoryman]

Macro and macro-B are options.
What are your 9000 parameters?

[kamalcnc]

Enable this parameters 9933#7,9932#7 bits


Sent from my Lenovo A6020a46 using Tapatalk