Need Help with FANUC 0i-T Toshiba VTL


Results 1 to 2 of 2

Thread: Need Help with FANUC 0i-T Toshiba VTL

  1. #1
    Member
    Join Date
    May 2017
    Location
    United States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Need Help with FANUC 0i-T Toshiba VTL

    first off this machine has been running for over 3yrs and we have used every tool position available. Recently we are having an issue with offset 16 not repeating its position. Not tool 16, just the offset. Touch the tool off do a tool change and bring it back in and its off .03. Its not consistent either. It did it a couple times in a row, then i couldnt replicate. Any ideas? I called Toshiba, they seem to think its an application issue but have not gotten back to me with an update.

    Similar Threads:


  2. #2
    Member
    Join Date
    Dec 2009
    Location
    ROMANIA
    Posts
    947
    Downloads
    0
    Uploads
    0

    Default Re: Need Help with FANUC 0i-T Toshiba VTL

    i have experience with VTL and big tool with BT 50 .
    check the inside spindle surface for chips stick to it,check the tool cone,as you say is only on 16 tool measuring,i think that tool do not position in same place after clamping due to some chips that make it to be in diferent position
    that are my 2 cents for you.
    Good luck.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need Help with FANUC 0i-T Toshiba VTL

Need Help with FANUC 0i-T Toshiba VTL