FANUC OM

[mark029]

Accidently deleted my tool change program. Was having issues loading a program but in the process of straightening that out I lost my O9020 program. I can load a program into the machine but when I try and load the O9020 program back in it throws an 074 ps alarm (program does not fall within the rang of program numbers of 0-9999, modify the number and try again). Any ideas on this? Any help would greatly be appreciated.

Similar Threads:

• how to shut off Fapt on a 1999 daewoo with FANUC Puma 200 with FANUC 18T control
• Need Help!- Fanuc Robocut Alpha 0B with Fanuc Series 16-W control 910 SRAM Parity System Error
• Weird Rs232 issue/Mystery with Fanuc 6M on Mori Seiki . Calling all Fanuc Masters !
• Need Help!- Fanuc drill tap center equipped with Fanuc OM-C i/o card details

[automechsys]

Your cnc is O-M correct? check para 10#4 is set to 0 while loading.