Need Help! Muratec MW 120 Lathe


Results 1 to 1 of 1

Thread: Muratec MW 120 Lathe

  1. #1
    Registered
    Join Date
    Apr 2017
    Location
    Romania
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Muratec MW 120 Lathe

    Hello,
    i need a solution as fast as anyone can humanly provide

    I have a Muratec MW 120 lathe that yesterday after a power break down showed on the display error 300 and 367 as attached picture.
    On the driver in the electric pannel there is no allarm, (A..)

    The machine is from 2003, theoretically it is a little bit unstable and perhaps because of this it shows no error on the driver but this is just a presumption.
    It is very possible that the machine does not have a phisically problem, it has lost a reference or it needs to change some parameter.

    Thank you

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Muratec MW 120 Lathe-img_2476-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Muratec MW 120 Lathe

Muratec MW 120 Lathe