Need Help! Fanuc Programming


Results 1 to 3 of 3

Thread: Fanuc Programming

  1. #1
    Member
    Join Date
    Dec 2006
    Location
    India
    Posts
    310
    Downloads
    0
    Uploads
    0

    Default Fanuc Programming

    Dear Experts,

    We have Fanuc 160i-MB

    PLC uses a Timer and instruction as per following

    SUB 24 44 = 1.000

    TMRB 1000

    Please let us know on how to locate this timer under PMCPRM - Timers ...... so that we can slightly increase the timer just for observation

    Regards

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2015
    Location
    USA
    Posts
    70
    Downloads
    0
    Uploads
    0

    Default

    TMRB's cannot be adjusted as they are hard coded into the ladder, not looking at a value in the timer table.

    Quote Originally Posted by M.RISHIKESH View Post
    Dear Experts,

    We have Fanuc 160i-MB

    PLC uses a Timer and instruction as per following

    SUB 24 44 = 1.000

    TMRB 1000

    Please let us know on how to locate this timer under PMCPRM - Timers ...... so that we can slightly increase the timer just for observation

    Regards




  3. #3
    Member
    Join Date
    Dec 2006
    Location
    India
    Posts
    310
    Downloads
    0
    Uploads
    0

    Default Fanuc Programming

    Quote Originally Posted by Mike283 View Post
    TMRB's cannot be adjusted as they are hard coded into the ladder, not looking at a value in the timer table.
    Thanks for quick response

    Other than TMRB's, any other type of Timers can be adjusted via PMCPRM?

    Please let me know, we are having machines with PMC type PMC_SB.000, 0iD-PMC



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fanuc Programming

Fanuc Programming