Fanuc OM AXIS INTERLOCK


Results 1 to 8 of 8

Thread: Fanuc OM AXIS INTERLOCK

  1. #1
    Member
    Join Date
    Apr 2009
    Location
    Puerto Rico
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Fanuc OM AXIS INTERLOCK

    Recently I purchase a Supermax 1 Rebel, Changing the parameters for use a DNC software accidentally turn off the machine before restore the PWE to 0. When I restart the machine I cant move any axis and it show a massage " axis interlock". I need help! Thanks Folks!!!

    Similar Threads:
    Last edited by RoblesTig275; 04-19-2017 at 12:38 PM.


  2. #2
    Registered
    Join Date
    Apr 2017
    Location
    United States
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc OM AXIS INTERLOCK

    Hold "P" key and "CANCEL" at the same time, power on the control, this should remove the alarm and allow you to move the axes away from OT switch.



  3. #3
    Member
    Join Date
    Apr 2009
    Location
    Puerto Rico
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc OM AXIS INTERLOCK

    Cincyice58, Thanks a lot!!! The cnc is moving again!!!



  4. #4
    Registered
    Join Date
    Apr 2017
    Location
    United States
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc OM AXIS INTERLOCK

    great to here



  5. #5
    Member
    Join Date
    May 2016
    Location
    United States
    Posts
    26
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc OM AXIS INTERLOCK

    I have a supermax mill just purchased it. It came without parameters, I could read only scrambled letters and numbers. I reentered all parameters from the data sheet found.
    I have an alarm so far "operator message" 2000.
    Any ideas...



  6. #6
    Member AndrewHarrison's Avatar
    Join Date
    Oct 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by zagpaz View Post
    I have a supermax mill just purchased it. It came without parameters, I could read only scrambled letters and numbers. I reentered all parameters from the data sheet found.
    I have an alarm so far "operator message" 2000.
    Any ideas...


    I now have this machine. Did you ever figure it out. Im in Post Falls



  7. #7
    Member agusano's Avatar
    Join Date
    Jan 2022
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc OM AXIS INTERLOCK

    Quote Originally Posted by AndrewHarrison View Post
    I now have this machine. Did you ever figure it out. Im in Post Falls
    TENGO EL MISMO PRBLEMA NO ENCONTARSTE SOLUCION



  8. #8
    Member
    Join Date
    Apr 2009
    Location
    Puerto Rico
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc OM AXIS INTERLOCK

    En aquel momento se encontro que la presion de aire que matiene el carrusel de herraminetas arriba no era suficiente , el control fanuc detectaba que el carrusel de herramineta estaba fuera de posicion.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fanuc OM AXIS INTERLOCK

Fanuc OM AXIS INTERLOCK