Results 1 to 3 of 3

Thread: Send program from PC to Fanuc controller

  1. #1
    Registered
    Join Date
    Feb 2007
    Location
    USA
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Send program from PC to Fanuc controller

    I've had the task of getting an OKK PCV60 with a Fanuc O-M controller to communicate with a PC via serial port assigned to me and know nothing about running the controller. The only person who did know has left the company. We need to send programs from the PC to the machine and haven't been able to get that done. I have been able to determine that the communication parameters are right on both ends. I can also see that there are three programs in the controller now and I don't know how to remove them.

    Can someone give me step by step directions for sending a program from the PC to the controller starting with turning on the machine and controller?
    Thanks much,
    derail

    Similar Threads:


  2. #2
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    20734
    Downloads
    0
    Uploads
    0

    Default

    I would suggest you get at least an operators manual, as it seems that RS232 communication is going to be the least of your worries.
    Al.

    CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


  3. #3
    Gold Member
    Join Date
    Oct 2004
    Location
    USA
    Posts
    742
    Downloads
    0
    Uploads
    0

    Default

    Here is a post that gives info on the subject.


    Notepad G code?



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed