Reply with QuoteWhat do you mean 3 dig.Originally Posted by ALLtra Mach
more tool offsets
Does anybody know how to open up my tool offsets to 3 digits?
I've got a Mori NV5000b with a Fanuc - I believe its an 18i.
Similar Threads:
What do you mean 3 dig.
individual who perceives a solution and is willing to take command. Very often, that individual is crazy.
do you mean work, wear,or geom.?
individual who perceives a solution and is willing to take command. Very often, that individual is crazy.
If I'm not mistaken, you get 3-digit offset numbers when you add additional tool offsets (over 99). The Doosan/Daewoo MX2500ST I've been working on has 400 offsets (Geom & Wear) per turret. Tools are called with 5 digits - first 2 are the tool number, last 3 the offset #.
Tool offsets, not work...Wear and geom
They are called with an H ....
I'm looking for the parameter to open them up.....shhhhhh...lol
I hate deburring.....
Lets go (insert favorite hobby here)
I can help you if you explan more what do you mean by they don't work and you what them opened up to 3 digits do you need more offsets or do they just not work.
I think this applies to 16/18/160/180 (i -series included) Check the following parameters and see what values are in there.
9926.4
9927.6 (cutter comp C for tool nose compensation)
9933.0 (separate height/diameter/geometry offsets)
-A
they work..I just need more
9926.4=0
9927.6=1
9933.0=1
I hate deburring.....
Lets go (insert favorite hobby here)
Posting Permissions
