more tool offsets

[ALLtra Mach]

Does anybody know how to open up my tool offsets to 3 digits?

I've got a Mori NV5000b with a Fanuc - I believe its an 18i.

[jackson]

Originally Posted by ALLtra Mach Does anybody know how to open up my tool offsets to 3 digits? I've got a Mori NV5000b with a Fanuc - I believe its an 18i.

What do you mean 3 dig.

[jackson]

do you mean work, wear,or geom.?

[dcoupar]

If I'm not mistaken, you get 3-digit offset numbers when you add additional tool offsets (over 99). The Doosan/Daewoo MX2500ST I've been working on has 400 offsets (Geom & Wear) per turret. Tools are called with 5 digits - first 2 are the tool number, last 3 the offset #.

[ALLtra Mach]

Tool offsets, not work...Wear and geom
They are called with an H ....
I'm looking for the parameter to open them up.....shhhhhh...lol

[sdl]

I can help you if you explan more what do you mean by they don't work and you what them opened up to 3 digits do you need more offsets or do they just not work.

[shibi]

Originally Posted by ALLtra Mach Does anybody know how to open up my tool offsets to 3 digits? I've got a Mori NV5000b with a Fanuc - I believe its an 18i.

I think this applies to 16/18/160/180 (i -series included) Check the following parameters and see what values are in there.

9926.4
9927.6 (cutter comp C for tool nose compensation)
9933.0 (separate height/diameter/geometry offsets)

-A

[ALLtra Mach]

they work..I just need more

9926.4=0
9927.6=1
9933.0=1