Need Help! GE Fanuc Series 150M


Results 1 to 3 of 3

Thread: GE Fanuc Series 150M

  1. #1
    Registered
    Join Date
    Dec 2006
    Location
    India
    Posts
    212
    Downloads
    0
    Uploads
    0

    Default GE Fanuc Series 150M

    Dear Sir

    We have a gear cutting machine

    We are able to JOG in either directions and even reference B axis without any errors

    In case of Auto cycle, B rotates less that 0.5 degree, then we get error SV323 B disconnect alarm by Soft

    We have replaced encoder still same fault, we are checking feedback cable, Motor winding resistance, Meggering etc

    Please advice further

    Regards

    Similar Threads:


  2. #2
    Registered
    Join Date
    Sep 2010
    Location
    france
    Posts
    116
    Downloads
    0
    Uploads
    0

    Default Re: GE Fanuc Series 150M

    Do you have an external position codeur or an optic or inductosyn scale ?


    Quote Originally Posted by M.RISHIKESH View Post
    Dear Sir

    We have a gear cutting machine

    We are able to JOG in either directions and even reference B axis without any errors

    In case of Auto cycle, B rotates less that 0.5 degree, then we get error SV323 B disconnect alarm by Soft

    We have replaced encoder still same fault, we are checking feedback cable, Motor winding resistance, Meggering etc

    Please advice further

    Regards




  3. #3
    Registered
    Join Date
    Dec 2006
    Location
    India
    Posts
    212
    Downloads
    0
    Uploads
    0

    Default Re: GE Fanuc Series 150M

    Sorry

    I forgot to add.... we do have external encoder, we checked it externally, looks quite neat and clean, also checked intermediate connectors from External encoder upto drive, found ok

    Yesterday we observed that no error when B axis is moved upto 72.203 degrees in Auto but if as per summary (program), if B is required to move even 0.1 degree more than 72.203 deg, we get errors

    Please advice

    To confirm this error due to external encoder, we dont have parameters except making 1815.1 as 0, any advice.........

    Regards



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

GE Fanuc Series 150M
GE Fanuc Series 150M