Need Help! MILLING HAMAI 3VS FANUC 0-M POSITION Z AXIS FROM TO EXCHANGE TOOL


Results 1 to 4 of 4

Thread: MILLING HAMAI 3VS FANUC 0-M POSITION Z AXIS FROM TO EXCHANGE TOOL

  1. #1
    Registered
    Join Date
    Feb 2017
    Location
    Poland
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default MILLING HAMAI 3VS FANUC 0-M POSITION Z AXIS FROM TO EXCHANGE TOOL

    Hello, Gentlemen, I have a problem with the router HAMAI 3VS (FANUC 0-M) and more specifically with the position of the Z axis to the tool change. It seems that the Z axis going down too low or paw tool change is too high because it interferes with the spindle, I'm not sure if also correctly positions the angle of the spindle to be replaced. Can anyone direct me what parameter corresponds to the base point of the Z axis to the tool change, the angle of rotation of the spindle and, if it paws magazine?

    Similar Threads:


  2. #2
    Member
    Join Date
    Sep 2010
    Location
    france
    Posts
    125
    Downloads
    0
    Uploads
    0

    Default Re: MILLING HAMAI 3VS FANUC 0-M POSITION Z AXIS FROM TO EXCHANGE TOOL

    Quote Originally Posted by Optimex View Post
    Hello, Gentlemen, I have a problem with the router HAMAI 3VS (FANUC 0-M) and more specifically with the position of the Z axis to the tool change. It seems that the Z axis going down too low or paw tool change is too high because it interferes with the spindle, I'm not sure if also correctly positions the angle of the spindle to be replaced. Can anyone direct me what parameter corresponds to the base point of the Z axis to the tool change, the angle of rotation of the spindle and, if it paws magazine?
    Your second position for tool change should be IN G30
    parameter is #737



  3. #3
    Member
    Join Date
    Dec 2009
    Location
    ROMANIA
    Posts
    947
    Downloads
    0
    Uploads
    0

    Default Re: MILLING HAMAI 3VS FANUC 0-M POSITION Z AXIS FROM TO EXCHANGE TOOL

    Quote Originally Posted by tmbruno28 View Post
    Your second position for tool change should be IN G30
    parameter is #737
    the spindle orientation parameter is 6577



  4. #4
    Activation process MACCIMILIAN's Avatar
    Join Date
    Jul 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    hello please help me I have a machine I lost the parametre cnc hamai 3va fanuc om email maccimilian@gmail.com



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

MILLING HAMAI 3VS FANUC 0-M POSITION Z AXIS FROM TO EXCHANGE TOOL

MILLING HAMAI 3VS FANUC 0-M POSITION Z AXIS FROM TO EXCHANGE TOOL