Whats in param 402,407,450 and 451
Hi guys i need help with Toshiba TUE-15 VTL fanuc 18i,. after not successful tool change actual tool number is 0, how to input manually a tool number in to parameter ? M06 does not work is coming up with this error 2025 - actual tool no 0 error. Any advice ? Thanks for any responses.
Similar Threads:
Whats in param 402,407,450 and 451
I do not have parameter 402,407,450,451 after 242 is jumping strait to 801. Any function must be on to get to this parameters ?
Any other advice ?
as far as i know the number of the tools are set in the D data---system-pmc---pmcprm----data----gdata somewhere from D450 or so.
I'am looking at the parameters and after 242 going strait to 801
The g-data have only 20 lines from no. 0001 to no. 0020, and number 0020 have address no. D0050 and that's it
Last edited by arturxyz; 02-10-2017 at 03:53 AM.
copy the ladder and send it to me at zavateandu@yahoo.com and i will look at it