FANUC 18i ERROR CODE 2025

[arturxyz]

Hi guys i need help with Toshiba TUE-15 VTL fanuc 18i,. after not successful tool change actual tool number is 0, how to input manually a tool number in to parameter ? M06 does not work is coming up with this error 2025 - actual tool no 0 error. Any advice ? Thanks for any responses.

Similar Threads:

• FANUC Error Code HELP....
• Need Help..Fanuc OMD-II error code: 420 & 421
• Need Help!- Fanuc Error code
• Error code help on Fanuc
• Fanuc 21i-t error code

[mbservice]

Whats in param 402,407,450 and 451

[arturxyz]

I do not have parameter 402,407,450,451 after 242 is jumping strait to 801. Any function must be on to get to this parameters ?

[arturxyz]

Any other advice ?

[STLMachinist]

I do not have parameter 402,407,450,451 after 242 is jumping strait to 801. Any function must be on to get to this parameters ?

Are you looking at parameters?... or Diagnostics?

[zavateandu]

as far as i know the number of the tools are set in the D data---system-pmc---pmcprm----data----gdata somewhere from D450 or so.

[arturxyz]

I'am looking at the parameters and after 242 going strait to 801

[arturxyz]

The g-data have only 20 lines from no. 0001 to no. 0020, and number 0020 have address no. D0050 and that's it

[zavateandu]

copy the ladder and send it to me at zavateandu@yahoo.com and i will look at it

[arturxyz]

Hi, sorry for long reply. How I can copy a ladder without memory card ? I only have connection to PC via RS 232 port.

copy the ladder and send it to me at zavateandu@yahoo.com and i will look at it

[arturxyz]

Problem solved.