When making a backup you have to press and hold the EOB key when you save the CNC parameters or the 900's will not be saved. So once you do get your machine running back it up using the EOB key. Also, save the diagnostics too
We have a Hwacheon HI-ECO 21HS Lathe with a Fanuc 0t control from 1995.
I had alarm 910 and had to initialize the memory with RESET and DELETE.
I have recorded the parameters but I miss the option parameters 900 to 940.
It seems that they are skipped with recording.
Does someone have the same machine and can you tell me numbers of the 900 parameters please.
I asked the importer but they can not help me with a proper list.
They gave me one but it does not work for this machine.
Similar Threads:
- Fanuc OM-C option parameters # 900 ?
- Need Help!- Fanuc 18i MB option parameters
- Need Help!- Haas option parameters
- Problem- Option parameters on 10T
- M32 Option parameters
When making a backup you have to press and hold the EOB key when you save the CNC parameters or the 900's will not be saved. So once you do get your machine running back it up using the EOB key. Also, save the diagnostics too
Thanks. I heared that from Fanuc also but the machine is dead for 6 weeks now and nobody can help. I have a list from Hwacheon but it is the wrong one and does not work.
I hope somebody has the same machine and is willing to provide the numbers.
Hi,
Check your private message.
Heavy_Metal
The Netherlands.
Also these may help in the future.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Hi ;
I have the sane problem as in this forum.
We have a Hwacheon Hi Eco 21HS machine and due to an electricty problem we lost parameters.
We have the back up but missing parameters between 900-940.
Is there any chance that you can help us ?
Regards
Hello,
I have the same problem.
I have the 900-940 parameters from other similar machine but not working.
Could somebody tell me why?
kind regards
Krystian