| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fanuc Discuss Fanuc controllers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-29-2007, 03:38 PM
| |||
| |||
I am relatively new to CNC machining. I am working on building a CNC Plasma Cutter and have a Fanuc 0iA Controller. The software that I am using to write GCode has a post-processor designed for Fanuc 0iM. I've never written a post-processor before, so I am wondering about the changes (if any) that will have to be made to that post-processor in order to produce GCode that is compatible with the 0iA. What determines those changes, meaning what should I be looking for in the 0iA & 0iM manuals to resolve my issue. I'd appreciate any input. Regards!  |
|
#2
01-30-2007, 06:29 PM
| |||
| |||
I guess I just figured out the answer to my own question. I found out that the 0iM is just a representation for the 0i's...which includes the 0iA. That 0iM notation was just used to indicate that the post-processor is compatible with that family of controllers. So...now that I figured it out, it sounds too obvious! well, it's one of those days...  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Difference between 320 and 340? | amasters | Gecko Drives | 5 | 05-24-2006 05:46 PM |
| What's the difference? | saturnnights | Knee Vertical Mills | 10 | 05-04-2006 10:31 AM |
| What's the difference? | ignatz | Stepper Motors and Drives | 4 | 03-07-2006 10:39 PM |
| What is the difference? | Hack | General CNC (Mill and Lathe) Control Software (NC) | 5 | 10-09-2005 09:46 AM |
| What's the difference? | Hack | General Metal Working Machines | 0 | 09-05-2005 07:35 PM |
| | |
Linear Mode
