Partial arc

[positiverake]

I was wondering on the newer fanuc controls if you can use a "R" for a raduis into a angle like you can with a 90 deg corner?

[CNCRim]

The answer is yes.

[jackson]

you can also use I & K

[vpcnc]

Corner rounding / chamfering is an option.

If you have it you can just add an R or C to a G01 event for a radius or a chamfer.

Some controls need ,R or ,C

G00 X0 Y0
G01 Z-.25 F10.
G01 X5.0 R.5 OR G01 X5.0 ,R.5
Y-5. R.5
X0. R.5
Y0. R.5
X1.
G00 Z1.