| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fanuc Discuss Fanuc controllers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-17-2006, 01:48 PM
| |||
| |||
i have a okuma howa act3 with fanuc ot control there is a db25 ports on it (old style printer port) i can get it to comunicate with my pc dnc software im not sure if im using the proper sequance o0001 input than lsk blinks or any other sugestins would be great  |
|
#2
10-17-2006, 01:53 PM
| ||||
| ||||
| Take a look here first. http://www.cadem.com/ncnet/ncnet_dncdetails-41.htm What happens if you try sending to PC? Al.
__________________ CNC, Mechatronics Integration and Machine Design. “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. |
|
#4
10-17-2006, 02:29 PM
| ||||
| ||||
| Set Para. 552 to 9 in the control and set your PC to 2400 baud. Al.
__________________ CNC, Mechatronics Integration and Machine Design. “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. |
|
#6
10-17-2006, 03:27 PM
| ||||
| ||||
| Before changing it try 4800 on the PC. And try sending to PC. Al.
__________________ CNC, Mechatronics Integration and Machine Design. “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
