fanuc 0tf control

[gcrandall]

I'm looking for a programming manual for a fanuc model 0tf. Anyone have any idea where I can find one?

[tobyaxis]

Originally Posted by gcrandall I'm looking for a programming manual for a fanuc model 0tf. Anyone have any idea where I can find one?

I have heard of a Fanuc 0T but not an 0TF. One of the best sourses for Fanuc Manuals is Fanuc America. What kind of Lathe do you have? Does it have Live Tools or a Sub-Spindle? Sorry, I'm trying to figure out what the "F" stands for.

http://cs24i.fanucamerica.com/fa_home/home.asp

Welcome to CNC Zone

[gcrandall]

I'm not sure about the "f" either. It's a used machine that came without a manual and someone penciled the f in at the end of the model # on one of the papers we did get, so I thought I'd include it. The machine is a YCM-TC-2 and there is no live tooling, so I imagine a 0t programming manual would get me started.
Thanks for the response

[MaxHeadRoom]

Check your PM's
Al.

[tobyaxis]

Originally Posted by gcrandall I'm not sure about the "f" either. It's a used machine that came without a manual and someone penciled the f in at the end of the model # on one of the papers we did get, so I thought I'd include it. The machine is a YCM-TC-2 and there is no live tooling, so I imagine a 0t programming manual would get me started. Thanks for the response

Fanuc 0T is a simple and powerful control for anyone first getting their feet wet in cnc lathe programming. Did you contact Fanuc America yet?

[Jarwalcot]

Hope this helps you out while you search for the real thing.

Cheers,

[gcrandall]

thanks to everyone for your help, I was able to aquire a programming manual!

[gcrandall]

thanks for your help

[tobyaxis]

Originally Posted by gcrandall thanks to everyone for your help, I was able to aquire a programming manual!

Your welcome and where did you get the Manual From?