LinkBack URL
About LinkBacks
That a pretty heavy duty power supply so I don't think PC power supplies will cut it.
Al.
| | |
I have a Fanuc 3tc that I believe the power supply to be bad in. Is there any reason that I could not put two atx(pc) power supplies together to replace this power supply. I should be able to get 24 volts, +/- 12 volts and 5 volts from this configuration. Any ideas or concerns would be helpful at this point.
That a pretty heavy duty power supply so I don't think PC power supplies will cut it.
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
I am looking at only replacing the control power supply. The computer part of the machine.
Posting Permissions
| | |
