02-03-2006, 05:58 AM
|
| | | Join Date: Feb 2006 Location: Australia
Posts: 12
| |
mori with t6- b controller sample program needed | |
G'day
New to the site and thanking everyone for the great info on here.
I have recently been asked to program a mori TL-1 with a fanuc 6t- b controller. This machine is the one with 2 turrets. It is pretty old so i hope someone here might be able to help me.
Can anybody help me out with a sample program. Just a simple bush with some facing drilling and parting. This will be enough to get me into the harder stuff as i have had a lot of experiance with other controllers but not this one.
The other thing is the offsets are a lot different to the newer fanuc's that i have used so if anybody has got any pointers let me know.
Thanks in advance
Anyfish |
Linear Mode
