So far I've used mostly FANUC 5S and 10S servos in my build, but I haven't much data on them.

I need more information on the following series:

5S: FANUC A06B-0314-Bxxx
5S/3000: FANUC A06B-0514-Bxxx
10S FANUC A06B-0315-Bxxx
10S/3000 FANUC A06B-0317-Bxxx

also information on the encoders (will go into a database/table).. tell us all which type they are and the resolution.

A860-0300-T001, T002
A860-0301-T001, T002
A860-0302-T003
A860-0304-T001, T011, T021, T111, T112, T113
A860-0308
A860-0309-T302
A860-0310-T023
A860-0311-T112
A860-0315-Txxx
A860-0316-Txxx
A860-0319-Txxx
A860-0320-Txxx
A860-0321-Txxx
A860-0324-Txxx
A860-0326-Txxx
A860-0330-Txxx
A860-0333-Txxx
A860-034x-Txxx
A860-035x-Txxx
A860-036x-Txxx
A860-037x-Txxx
A860-038x-Txxx
A860-039x-Txxx

etc, etc.