Eumach tool change macro lost in system reset

[dowens]

I have a 1991 Eumach 1300 cnc milling machine and the ATC macro was lost when a 101 error came up on the machine and a power up while pushing the delete key was performed.

Unfortunately there was no back up of this file. I have received a printout of a later version of the ATC from Eumach but this does not run in the machine. it stops in line N60.

(Fanuc OMC & OMF Series ATC program 09001)

N10 G65 H81 P150 Q#1008 R1;
N20 G65 H1 P#130 Q#4011;
N30 G65 H1 P#131 Q#4003;
N40 G80 G49 G40 G50 M5; (PARAMETER 912.1=1)
N50 G91 G28 Z0;
N55 G04 P100;
N60 M6;
N65 G65 H81 P80 Q#1010 R1;
N70 G04 P100;
N75 G65 H80 P65;
N80 G30 Z0;
N90 G65 H81 P120 Q#1009 R1;
N100 G4 P100;
N110 G65 H80 P90;
N120 G91 G28 Z0;
N125 G65 H81 P140 Q#1011 R1;
N130 G4 P100;
N135 G65 H80 P125;
N140 G#131;
N145 G#130;
N150 M99;

Any help on the reason for the problem would be appreciated.

The spindle goes to the home position ready for the toolchange but just stops. I have tried inserting an M19 to orientate the spindle and this works fine.
I am unsure of the elements of this macro that control the toolchanger.

Similar Threads:

• Fanuc OM, lost tool change macro
• Macro Program for Eumach VMC
• Need Help!- Getting lost on tool change
• Need Help!- Tool Change not working after reset
• need help wana make macro for getting tool change by giving tool pot no on vmc instea

[jagdeep]

i also have eumach v 24 , do u have any machine manual , can i help

[sinha_nsit]

Tool-code missing!

[Berran]

I have a 1991 Eumach 1300 cnc milling machine and the ATC macro was lost when a 101 error came up on the machine and a power up while pushing the delete key was performed.

Unfortunately there was no back up of this file. I have received a printout of a later version of the ATC from Eumach but this does not run in the machine. it stops in line N60.

(Fanuc OMC & OMF Series ATC program 09001)

N10 G65 H81 P150 Q#1008 R1;
N20 G65 H1 P#130 Q#4011;
N30 G65 H1 P#131 Q#4003;
N40 G80 G49 G40 G50 M5; (PARAMETER 912.1=1)
N50 G91 G28 Z0;
N55 G04 P100;
N60 M6;
N65 G65 H81 P80 Q#1010 R1;
N70 G04 P100;
N75 G65 H80 P65;
N80 G30 Z0;
N90 G65 H81 P120 Q#1009 R1;
N100 G4 P100;
N110 G65 H80 P90;
N120 G91 G28 Z0;
N125 G65 H81 P140 Q#1011 R1;
N130 G4 P100;
N135 G65 H80 P125;
N140 G#131;
N145 G#130;
N150 M99;

Any help on the reason for the problem would be appreciated.

The spindle goes to the home position ready for the toolchange but just stops. I have tried inserting an M19 to orientate the spindle and this works fine.
I am unsure of the elements of this macro that control the toolchanger.

Hello, I have a similar Eumach that we bought at auction, our problem is that we need the "Keep Relays" . Any help would be greatly appreciated.