Trying to tell how much memory my Fanuc 0M actually has and if it is all enabled in the parameters? Currently I only have 16m of memory. Is there a way to verify that the machine really only has 16m of memory? (Without attempting to enable more memory in the parameters and messing stuff up?)
Also anyone have experience with Tulip or Memex for upgrading the memory on these controls? Thanks
Contact memoryman on this site.
Your usable part program memory depends on the version: analog max.48k (120m) or digital 128k (320m). The motherboard part number will tell us which version you have.
The physical amount and type of memory depends the memory chips installed.
Up to a point, some is set by par the rest by addition.
PM sent.
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Hello this is Wayne from Memex. You can upgrade your Fanuc 0 to a max. of 128k or 320 meters. Model A & Model AD will only allow you to increase to 48k or 120 meters.
Here is a list of motherboards to determine which model you have:
Fanuc 0 - Model A - Masterboards A16B-1010-015X or 024X
Fanuc 0 - Model AD - Masterboard A16B-1010-021X
Fanuc 0 - Model B - Masterboard A16B-1010-028X
Fanuc 0 - Model C - Masterboard A20B-2000-017X/018X or A20B-1002-036X/075X
If you have any questions please feel free to contact me: waynem@memex.ca
Posting Permissions
LinkBack URL
About LinkBacks
