| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fanuc Discuss Fanuc controllers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-17-2012, 06:24 AM
| |||
| |||
horizontal Mitsubishi M-H4BN with a Fanuc 18iM programmed federate – 360ipm high feed rate – 500ipm when interpolating a voluMill toolpath the feedrate varies from around 60-360 as it should The main problem is when the machine reads the high feed of 500 the machine literally slams and shakes the floor when there is a direction change. I don’t think this is a volumill problem but a machine problem. We have some machines that automatically decelerate and a machine that we have to add a code too to activate deceleration. Is it possible there is a parameter for this? This is a new used machine for us so I don’t really have a resource for technical questions what do you guys think?  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| position inaccuracy at high feed rate | ethanbrush | Fadal | 8 | 08-07-2010 01:05 PM |
| Okuma mill feed rate jumps to rapid feed | easyguy97 | Okuma | 6 | 12-20-2009 04:14 AM |
| Any one using Tormach in high speed feed rate? | madaouk | Tormach PCNC | 22 | 12-23-2008 06:14 PM |
| Need Help!- Feed rate Ovverride also Increases rapid rate. | Korellibopper | Machines running Mach Software | 1 | 01-30-2008 05:37 PM |
| Feed Rate and Spindle Rate for this cut? | DroopyPawn | General Metalwork Discussion | 20 | 11-21-2007 11:12 PM |
| | |
Linear Mode
