| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fanuc Discuss Fanuc controllers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-31-2011, 03:51 PM
| |||
| |||
Hi I got a Yam CK1 whit fanuc t15 i bought the machine a few weeks ago and conected it yesterday, when we did the ref for x and z axis yesterday everything went good. But today i override the x axis when i was going to ref the machine. How do i override and move the x axis so that we can start the machine. when its over the limitswitch i cant start the machines hydralics, if i have the on button pressed in i hear the hydralics but i can move the x axis. Am new whit fanuc t15 and this machine and i cant find it in the manual Can anyone help me  |
|
#2
12-31-2011, 03:59 PM
| ||||
| ||||
| Usually there is a manual overide switch to bring the machine back off the limit, if you cannot find one, turn the machine off, and wind the axis back off the limit, then power up and try again. Al.
__________________ CNC, Mechatronics Integration and Machine Design. “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Fanuc 10M - 2nd limit switch problem! | Swemill | Fanuc | 5 | 01-06-2012 01:51 PM |
| Limit switch problem | paulb | DIY-CNC Router Table Machines | 5 | 07-13-2009 05:49 PM |
| Limit switch problem? | Bill Gillen | AjaxCNC Control Products | 2 | 05-08-2008 12:02 PM |
| Problem With IH Limit Switch. | Willyb | Industrial Hobbies (Support forum) | 5 | 11-06-2005 05:17 PM |
| limit switch override | swarfmacdaddy | TurboCNC | 5 | 12-12-2004 03:47 AM |
| | |
Linear Mode
