Need Help! Spindle does not stopped after M5 call! - CNCzone.com-The Largest Machinist Community on the net!

hatakekakashi · #1 09-16-2011, 01:01 AM

Can u help me? fanuc 21i-tb,call M5 does not stop spindle.
Thanks!

hatakekakashi · #2 09-16-2011, 08:15 PM

Who can help me, please

g-codeguy · #3 09-18-2011, 01:27 AM

We have a Nakamura TW-20 that had the same problem. This was with Live Tooling only. Our cause was a sensor. Don't ask me which one because I am the programmer, not the maintenance man. However, I could find out Monday from him if you'd like me to.

sinha_nsit · #4 09-21-2011, 07:22 AM

Has the MTB defined a different code for spindle stop??

MIYANO vs FANUC · #5 09-27-2011, 09:20 AM

Do you have a spindle load meter on your machine? If so what does the meter show when you command the M5?

yours_prabhat · #6 09-27-2011, 12:59 PM

After the MO5 is any alarm ? or no alarm ? update

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sieg X3 Spindle Motor stopped	DvG4	X3/SX3/G0619/G0463	4	06-18-2011 11:52 AM
Need Help!- F20 spindle stopped	settingbur	Want To Buy...Need help!	0	05-16-2011 03:42 PM
Spindle stopped turning	WoodMizer	Chinese Machines	2	05-16-2011 12:46 AM
Workaround for alarm 186? G81 with spindle stopped	laka	Haas Mills	3	01-09-2011 07:22 PM
Spindle motor stopped, stepper motors flaky...	americanbehn	Machine Problems, Solutions , Wireless DNC, serial port	1	11-05-2007 08:25 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)