Doosan mill/turn with Fanuc 31i ?

[Integrexman]

Is there a G-code to change X values from diameter to radius?

[CNCRim]

Not as I know of, but it can easy fix if you have NcEdit/Cimco. And if you want sometime that free then you can do it with Wordpad or Microsoft Word.

[Integrexman]

On mazaks I can use G122.1 to change from diameter mode to radius when milling. I would have thought the 31i control could do it.

[stevo1]

Is there a G-code to change X values from diameter to radius?

Parameter 1006.3 (DIAx).

See attached.

FYI I have seen this changed before and it can be very confusing and mistakes made by operators.

Stevo

[Integrexman]

Thanks Stevo

This parameter looks like it will change to radius for both turning and milling. I do not think the guys running the machine will go for this.

[stevo1]

My guess is that if they are already use to having this set to diameter then they will probably not like switching. As I already stated this can cause problems.

Stevo