| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fanuc Discuss Fanuc controllers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
07-27-2011, 11:28 PM
| |||
| |||
Looking for the information on any FANUC AC Red cap servo that is at least: 26 to 104 in. lb TENV Torque 2.9 to 11.8 NM TENV Torque 88 to 155v AC About 1,000-2,000 RPM 260 to 1,640 in. lb peak torque continuous rated current about 7.0 Amp to 12.0 Amp It's gotta weigh about 20 to 70lb max. A 2,000-3,000 encoder is ok too. I use the A16B-2200-009x Axes card for 3&4 Axes machines. I have several amplifiers available to me so I need to know which will work with this card. Greg  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| FANUC 10S servos | gbowne1 | Fanuc | 0 | 08-07-2010 08:52 PM |
| WTB: FANUC 0M or 6M AC red cap servos | gbowne1 | Servo Motors and Drives | 1 | 05-16-2009 01:09 AM |
| I just got a Fanuc Robot and its got AC Servos | Musick7 | Servo Motors and Drives | 2 | 05-15-2009 11:54 PM |
| CamSoft with Fanuc alpha servos | cnc-it | CamSoft Products | 5 | 03-06-2008 09:16 PM |
| Gecko Drives and Fanuc servos? | Radius | Gecko Drives | 2 | 06-26-2007 08:07 PM |
| | |
Linear Mode
