AMADA Pega 344 FANUC-P System6 conmunication with a PC via RS232. - CNCzone.com-The Largest Machinist Community on the net!

luiso · #1 07-05-2011, 03:41 PM

Hi, I have a AMADA Pega 344 FANUC-P System6.
I need to know, how can I conmunication with a PC via RS232, the cable wiring, if exist any protocol, what ever.
thank you

memoryman · #2 07-08-2011, 09:15 AM

what pc communication software are you using? Hyperterminal works.

luiso · #3 07-08-2011, 10:02 AM

Hi, I have proven with Hiperterminal and other softwares, I believe that the problem is in the connection of the cables NC <-> PC. Also I do not know if some protocol exists, HandShake or another. Can you help me with these doubts?

Thank you

memoryman · #4 07-08-2011, 01:16 PM

use a null modem cable or adapter. You can use text files for both sending and receiving.
Do you have manuals?

Originally Posted by luiso

Hi, I have proven with Hiperterminal and other softwares, I believe that the problem is in the connection of the cables NC <-> PC. Also I do not know if some protocol exists, HandShake or another. Can you help me with these doubts?

Thank you

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Help!- Amada Pega 344Q	DHO.nl	Controller & Computer Solutions	3	03-21-2012 10:22 AM
Pega 344 Amada Fanuc 6M electrical diagram	nguyenthanhthi	Fanuc	8	10-21-2011 08:31 AM
Need Help!- Amada Pega 244 w/ Fanuc 6m B controller memory replacement	MetalForce	Fanuc	10	08-10-2011 04:14 PM
Amada Pega 345 X axis parallelism problem	terrycoughlan	CNCzone Site News and Contests	2	06-08-2011 04:22 PM
Need Help!- Amada pega fanuc 04pc system error	cndcnd	Fanuc	7	04-01-2011 01:19 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)