0m-c canned cycles

[jpcnc]

My recent purchase takasawa mac v2e vmc with a fanuc 0m has no manuals, a cincinatti i was running recently had a 0m also, this had a softkey in edit "trans" which was all the cycles such as pockets etc etc, mine doesnt have this, would the codes still actually work, g170 g171 i think it was? If so could somebody please write me a few of the common cycles I would use?
Many thanks
Jay

[greenery_fr]

Originally Posted by jpcnc My recent purchase takasawa mac v2e vmc with a fanuc 0m has no manuals, a cincinatti i was running recently had a 0m also, this had a softkey in edit "trans" which was all the cycles such as pockets etc etc, mine doesnt have this, would the codes still actually work, g170 g171 i think it was? If so could somebody please write me a few of the common cycles I would use? Many thanks Jay

Give me Your email I will send manual

[gbowne1]

Try their USA center.

takisawa (english)_top page

They are in Buffalo Grove, IL.

The only other information I found on the V2E is on another forum.

I'm looking at adding some canned cycles to my 16.. it's pretty much almost done... but some 0M-C and 0T-C canned cycles would be cool to have in my library. Anyone have some to share?