| | |
I have an old CNC with FANUC 0M controller dose someone knows if it can be used with the software like mach3 in order for me to be using moor M code
then the one i have.
i am using a dnc drape feed because of the small memory.
dror
What is the value you have in option Par 901?
M code does not give you more memory, unless you are talking about enabling DNC which it sounds like you are doing?
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Posting Permissions
| | |
LinkBack URL
About LinkBacks
