Need Help!- FANUC SERIE 0-MC CANNED CYCLE

[renato13]

FANUC SERIE 0-MC
SOFTWARE: 0469-21
TYPE: A02B-0098-B511

1. Drilling with CANNED CYCLE doesn't work. During the course of program, no error is shown – the program just skips the lines where the cycle of drilling should be performed, but the machine does nothing:

O0001
N10 G0 G90 G43 H11 Z20. M11
N11 S3 M13
N12 G90 G99 (G98) G81 X100. Y200. Z-10. R20. F3000
N13 X200.
N14 X250 Y250.
N15 X…..
…
N20 G80 G91 G28 Z0 M12.

From the line N11 the program goes to the line N20 and skips the lines in between, but no error is shown.
We would like to know if it's possible to enable these CANNED CYCLES (at least the cycle G81) with the settings of certain parameters. If you know which parameters have to be changed, please let us know.


2. During the operation of HELICAL INTERPOLATION with use of all three axes (X, Y, Z) the error 021 is shown.
Example: N10 G02 G91 G17 X200. Y200. R200. Z20. F3000

Is it possible to enable this HELICAL INTERPOLATION with the setting of certain parameters. If you know which parameters have to be changed, please let us know.

[sld4121]

If you call Fanuc, I am certain they can turn on the correct parameters for you.