| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fanuc Discuss Fanuc controllers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
05-19-2011, 06:21 AM
| |||
| |||
I'm trying to get this old cnc running. If you have any input I'd greatly appreciate it. The machine has been sitting for 3 years or so. It ran when parked, I replaced the backup battery, the power goes on, panel lights up, but nothing goes on. Programming is still in the NC controller. There are dim red lights on in the back of the cabinet, like old led's. Previous owner thinks that is the problem. Pictures are here showing the lights I hope.. Pictures 3, 4 and 5 show the lights at the link below Pratt Whitney Star-Turn 8-15 CNC Lathe pictures by pelletman - Photobucket Thanks for your help! Dave  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- 401 servo alarm (VRDY OFF), at turn on, Fanuc OM SOLVED | padobranac | Fanuc | 16 | 04-25-2011 12:48 PM |
| Need Help!- Parameters of Star VNC-32 CNC Lathe, Fanuc 10T, S/n 006021, Date of Mfg 1985-9 | ejaz199 | CNC Swiss Screw Machines | 0 | 12-22-2010 03:46 PM |
| Need Help!- Fanuc 10T 1985 Hitec-turn 25 lathe | dave400 | Fanuc | 3 | 10-02-2010 06:58 PM |
| Need Help!- Fanuc mill turn lathe post needed! | jake_tb | SolidCam | 0 | 03-29-2010 11:44 AM |
| Need Help!- Star SR-32 Alarm help! | bloomis | CNC Swiss Screw Machines | 3 | 03-02-2010 08:43 AM |
| | |
Linear Mode
