| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fanuc Discuss Fanuc controllers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
05-05-2011, 09:19 AM
| |||
| |||
Help please for a Newbie.... I stopped the machine in mid-process and can't do anything now without the warning - ATC not ready. I'm sure it's an easy one to fix if you know what you are doing! The machine is a Denford Mill (15 years old). The controller is a Fanuc OM Cheers - John  |
|
#2
05-07-2011, 03:35 PM
| |||
| |||
| May be the arm of atc tool change not in position. |
|
#3
05-07-2011, 03:42 PM
| ||||
| ||||
| You need the OEM M code list to see if the T.C. moves can be input individually via MDI to get it back in sync. Al.
__________________ CNC, Mechatronics Integration and Machine Design. “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. |
|
#4
05-08-2011, 12:23 PM
| |||
| |||
| HI ! Try to bring back the ATC arm in position by turning manual the motor that drive the arm until the in position sensor lights. |
|
#5
05-11-2011, 05:58 PM
| |||
| |||
| You should have a manual switch to move the changer out and back. In MDI mode do a M19 command to orientate the spindle then switch to manual and use the manual switch to put the changer back in position. You cant do anything to the ATC until you do a M19. |
| Sponsored Links |
| |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Alarm 24 displayed on spindle drive - not ready | maxvic | Fanuc | 4 | 06-28-2009 05:44 AM |
| Need Help!- fanuc 0m servo not ready 401 alarm | keithc | Fanuc | 3 | 04-16-2009 08:45 AM |
| Problem- O-T not ready alarm | Ryno | Fanuc | 7 | 09-19-2008 09:14 AM |
| Taig CNC ready, how ready is that? | JB_in_Fla | Taig Mills & Lathes | 10 | 03-31-2008 04:47 PM |
| Improper V-Ready Off Alarm??? | Crashmaster | Fanuc | 2 | 09-18-2007 07:31 AM |
| | |
Linear Mode
