| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fanuc Discuss Fanuc controllers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
05-03-2011, 03:56 PM
| |||
| |||
Hello guys, I am having a bit of a problem with the C axis on a Takisawa EX-322 and was wondering if any of you have came across it before.Intermittently in the early stages of an index move the machine faults out with alarms 401 and 438, basically excess current.I have confimed that the hydraulic brake is releasing and not causing undue load.Any thoughts or advice would be most appreciated.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Z axis problem | Romper | Machine Problems, Solutions , Wireless DNC, serial port | 0 | 12-19-2010 05:37 PM |
| z-axis problem | nikbrewer | DIY-CNC Router Table Machines | 5 | 01-08-2009 01:49 PM |
| Need Help!- ref axis problem | destro | Machines running Mach Software | 1 | 06-28-2008 11:25 AM |
| Z Axis problem | studysession | Mach Software (ArtSoft software) | 2 | 05-05-2007 06:06 PM |
| Z-axis problem | Trainhound | Machine Problems, Solutions , Wireless DNC, serial port | 3 | 12-14-2005 02:24 PM |
| | |
Linear Mode
