Fanuc O-M controler

[handyman]

We have a Femco WBMC 110 with a Fanuc O-M Contoler. Need to have it peck drill with the W axis instead of the Z axis ( W being the spindle and Z being the saddle ) Thanks, Tony

[John T. Rhoades]

Haven't used an OM with a Femco but the Femco we have we just substitute the W for the Z on the G83 / G73 command.

[lesr]

handyman,

Take a look at EditComm (url below)

You could produce expanded code for deep hole drilling and then select which Zs you need to change to Ws using the find & replace function


EditComm is also on special offer but be quick the offer ends at midnight on the 4th May

regards

Les Robbins

EditComm - CNC communication software - Les Robbins CNC Services