Did you ever get a answer for this. I have the same problem with a Mori DL20 but they want $12,000.00 for the complete board and membrane
I recently had to replace a membrane on a 16T control. Seems like an oddball flatpanel in that the panel is made by FUJI on a mori-seki with a 16T control. I was not able to get the membrane, but the WHOLE PANEL! Part #I16013A01. There are another set of numbers on the panel "ab12c-4064/EIO". 4600.00! That's one EXPENSIVE replacement. My question is this. Is the ab12C number possibly the membrane number? My Mori dealer has a habit of overcharging me for the better commission. The new panels membrane comes off like it was just stuck on. It's only a matter of time before this one will need replacing. I sure don't want to shell out another 4600!
Anyone out there can help in finding a part number for this panels membrane?
Similar Threads:
Jack of all, master of none
Galveston, TX
Did you ever get a answer for this. I have the same problem with a Mori DL20 but they want $12,000.00 for the complete board and membrane
Do you have a pic
Remove the outer plastic bezel. Should be a part number on the outer edge of the membrane.
Sent from my SM-T813 using Tapatalk