Is there a USB Mem stick to RS-232 converter?

[hrh]

Please indicate a supplier or manufacturer for a PCB or device that converts the data from a USB Memory stick directly into RS232 data for program transfer to CNC.

Therefore you can insert the USB stick at the CNC and transfer the data without connecting a laptop or desktop PC.

Have seen this done on a Komatsu plasma cutter imported from the USA and using FANUC 0iMC control.

[DMF_TomB]

.
eNetDNC - xlTransfer Unit
USB CNC
.
it is cheaper many times to use an old laptop computer but there are companies making very small flash drive to rs232 adapters some even able to mount to the CNC

[dcoupar]

Originally Posted by hrh Please indicate a supplier or manufacturer for a PCB or device that converts the data from a USB Memory stick directly into RS232 data for program transfer to CNC. Therefore you can insert the USB stick at the CNC and transfer the data without connecting a laptop or desktop PC. Have seen this done on a Komatsu plasma cutter imported from the USA and using FANUC 0iMC control.

Here's two:

Shop Floor | Ethernet, Portable Units, PDAs and HHTs - Shop Floor Automations

[hrh]

Thanks to DMF_TomB and dcoupar for the info.