Fanuc 6TA & Tsugami T-NCM 70/160

[vanwyksc]

I bought a Tsugami Mercury T-NCM 70/160 CNC lathe with a Fanuc 6TA controler. The machine can take live tooling. If I give a M81-M92 command the chuck starts turning to index to any of the 12 positions. My problem is that the chuck keeps on turning and dont stop. I later realize that there is 6 cams that gives a binary value for the controller where to stop, but there is no pick-up sensors or proximity switches to give a signal. I need a maintenance manual or some wiring diagrams or any help PLEASE.

[hrh]

Try to contact Edwin Roth & Co (Speak to Aaron) in Spartan, Kempton Park. They were the agents for the Tsugami in South Africa and may be able to help with info and drawings.
Please supply them with the machine and control serial number.

If you can't get any results send me a PM or see Home