Need Help! wifi


Results 1 to 2 of 2

Thread: wifi

  1. #1
    Registered
    Join Date
    Jan 2014
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default wifi

    hi
    I have a few machines from a hurco mill mb2 and a wasino gang laith bridgport interact 5 and a puma 10 s laith with a 10 t
    I have tried to put a wifi recever on all the machines and I got it to work on my wirecutter only has eny one got it working on the 10t
    when I transmit I get some very funny text
    I know I can not drip feed but all my pgm are short
    I am using LM technologies lm 48

    thanks

    Similar Threads:
    WORK ALL DAY PLAY ALL WEEKEND


  2. #2
    Member jalessi's Avatar
    Join Date
    Feb 2007
    Location
    United States
    Posts
    4553
    Downloads
    1
    Uploads
    0

    Default

    Steve,

    On page ten (10) of the LM technologies lm 48 manual it documents the baud rate setting commands. If the baud rate settings are not correct for each individual machine you will have communication errors etc...

    I see the default setting for the LM 48 is 19200 bps , the default bps speed for many machines may be 9600.

    See attached image for a basic Fanuc setup.






    Jeff...

    Attached Thumbnails Attached Thumbnails wifi-bt-jpg  
    Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

wifi

wifi