Need Help!- 00PC Serial Connection

[Stupidav]

I have an old turret press that has a 00PC controller. I am installing a Ethernet to Serial Adapter and need to know the Serial connection pinout to know for sure what cable I need.

I have read in a few places that the controller actually utilizes pins 1-8 and pin 20 but I have not been able to find what pin is what.

Any help is greatly appreciated!!!!!

[dcoupar]

I don't have anything on the 00PC, but typically Fanuc wires the DB25 connector as follows:

1 - FG
2 - SD
3 - RD
4 - RS
5 - CS
6 - DR
7 - SG
8 - CD
20 - ER
25 - +24V CAUTION!!!!!

If using XON/XOFF handshaking, you must jump 6, 8, and 20 on the NC end of the cable.
Also, 4 & 5 should be jumped for XON/XOFF.

[Stupidav]

For that matter, I have seen many different descriptions / labels for the controlers. Ours say 00-PC with a Type on A02B-0098-BS12. What is the name that everyone knows this control by?

[jdeere4250]

an 004pc is a fanuc 0PC control.