I'm working on a Fanuc 15MB.
The control is displaying an alarm WN32 Link Control Data Error.
The alarm list suggests the following:
Please confirm whether the address of symbol RC_CTLB_
INIT in map file is set to LANGUAGE ORIGIN of the system parameter.
Or, please make the link control statement again.
Where do I find this?
How are you?
Today I have to discuss my one machine problem in detail.
Problem: System alarm 970 NMI occurred in PMC LSI device.
Fanuc manual said replace the main board PCB.
Machine MAIN mother board with screen is A02B-0283-B500
Parts of this mother board is
A20B-3300-0280/04B Graphic card
A20B-3300-0311/08f CPU card
A20B-3300-0390/02A Servo control card
A20B-3900-0164/04A DRAM/SRAM card
A20B-8100-0661/10E Mother board PCB
I am waiting for your positive reply.
Email id: Subhani_engr1@yahoo.com
Messanger yahoo: Subhani_engr1@yahoo.com