Need Help!- FANUC 0-TD LADDER DISPLAY

[keyancnc]

Hi friends, i am having lathe with Fanuc 0-TD. i want to alter the ladder diagram. but in the ladder page I am getting the following message.


"DISPLAYING THE LADDER DIAGRAM IS PROTECTED BY ITSELF"

But i changed the parameter #60 bit 2 in to one. still i cant able to view the ladder diagram. kindly give the soultion for this problem.




Regards,
Keyan

[cnc2149]

The machine tool builder has set G119 bit 0 = 1 to disable PMC Ladder Display.

The PMC Ladder on a Series 0-C/D is contained on 2 EPROMs. In order to edit the PMC Ladder, you will need a FANUC PMC Ladder Edit Cassette or FAPT Ladder software, a FANUC PMC Writer or FA Writer, and the knowledge of how to use these tools.

[ker2008]

you can send me the 0E1.BIN 0E2.BIN
i can help you !
my e-mail : kele225 @ 163.com

[cncserveng]

Why would you want to change an OEM PLC ?

Please explain further, can you look at the PMC data page ?

[rai]

please tell me the machine tool builder name. or send me your eproms oe1 & 2.

Originally Posted by keyancnc Hi friends, i am having lathe with Fanuc 0-TD. i want to alter the ladder diagram. but in the ladder page I am getting the following message. "DISPLAYING THE LADDER DIAGRAM IS PROTECTED BY ITSELF" But i changed the parameter #60 bit 2 in to one. still i cant able to view the ladder diagram. kindly give the soultion for this problem. Regards, Keyan