question about Fanuc (milling) codeline - CNCzone.com-The Largest Machinist Community on the net!

kean · #1 06-30-2005, 09:34 AM

Hello
first, sorry for my bad english.

Can me anyone explain what this line of Fanuccode (milling) exactly means:

G43 H1 Z2 T1034

I know
G43 means Tool length compensation with memory cell 1 (H1) and go to Z 2, but what mean T1034 in this Line?

thanks for your help
kean

urs · #2 07-01-2005, 01:36 PM

Hello kean

I believe, this is the preselection of the next tool.

ciao
Urs

psychomill · #3 07-01-2005, 04:04 PM

I believe, this is the preselection of the next tool.

Yes, and it sounds like you're using the "Tool Group" method of tool selection. The standard tool numbers are a 3-digit max. Tool group is 8 digit.

kean · #4 07-01-2005, 07:31 PM

Hallo again

Thanks for your reply.

Where can i find more about the Tool Group method.
Up to now i think for example TXXYY mean,
TXX: preselect tool no. XX for toolchange and
(T)YY: use the memory cell YY for tool length compensation for tool XX.

ys kean

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Milling Brass Question	djacob7	General Metal Working Machines	1	06-13-2005 05:19 PM
Help with a Fanuc GE 0M ( milling machine 3 axis )	calor	Fanuc	3	05-18-2005 12:15 PM
pcb milling question	NickLatech	DIY-CNC Router Table Machines	1	03-04-2005 03:49 AM
Fanuc 6t question	max_c	General Metal Working Machines	2	10-14-2004 05:56 PM
Just a question about plunge milling.	Machine1	Hard and High Speed Machining	4	01-28-2004 09:36 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)