05-13-2010, 01:58 AM
|
 | | | Join Date: Mar 2009 Location: Australia
Posts: 366
| |
Originally Posted by fv74  I have a Puma 10S with an OT control. I am getting an 02 alarm when I try to power up the machine. The hydraulic pump will come on when I depress the Machine Ready button, but it goes off when I release the button. The machine recently ran low on way lube, but I have refilled the reservoir. What else should I look for?
Thanks, Dave |
The axes will have torque limiters tied into the e-stops
push the hydraulic button and in hand wheel mode wiggle the mpg back and forth.
just a thought obviously it is something tied into the e-stop that doesn't actually interfere with the hydraulic on button IE hardware limit switches or Torque limiters.
__________________
***********************************************************
*~~Darwinian Man, though well-behaved, At best is only a monkey shaved!~~*
***********************************************************
*__________If you feel inclined to pay for the support you receive__________*
*_______Please give to charity http://www.oxfam.org/en/getinvolved_______*
*********************************************************** |
Similar Threads 
Linear Mode
