| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Fanuc Discuss Fanuc controllers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
09-13-2010, 02:06 PM
| |||
| |||
We just bought a hardinge superslant sb 3 gn 1986. We had to convert it to a 230 from a 460 to power it on. After using jumpers to convert it, we powered it on and it came on. However, we have an alarm that wont let the x axis move or anything for that matter. The alarm is 2008 x axis brake is on not ready. Help!!!!! We got a wiring diagram from Johnson electric coil company and there engineer told us how to convert it. Don't know if it was right, but it did power up fine and the phasing seems to be correct cause the fans are going in the right direction.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- Hardinge Superslant SB3 GN 3 Axis Lower Turret | LMartin | Hardinge Lathes | 18 | 09-17-2010 09:42 AM |
| Need Help!- 4-axis Hardinge superslant homing alarm | artin5 | Hardinge Lathes | 0 | 01-29-2010 01:51 PM |
| m31 on hardinge superslant 6t control | winton | Hardinge Lathes | 2 | 05-02-2009 10:51 AM |
| hardinge superslant retrofit | fcycles | General Metal Working Machines | 0 | 02-14-2008 09:15 PM |
| | |
Hardinge superslant x axis brake is on 
Linear Mode
