Post Processor for yasnac mx1 control

[johnny11]

Does anyone know where I can get a mastercan version 9 post processor to run my matsuura mill that has a yasnac mx1 controller?

[CNCRim]

Your mastercam dealer or go MasterCAM.com .

[cnc_swe]

BOBCAD/CAM have all postprocessor if the don´t have they make a new for free. I have the BobCad V23 and the make one to my Sinumerik 810T and one to my Sinumrik 810M both work fine

[dcoupar]

BOBCAD/CAM have all postprocessor if the don´t have they make a new for free. I have the BobCad V23 and the make one to my Sinumerik 810T and one to my Sinumrik 810M both work fine

That's great, but he has MasterCAM, not BOBCAD/CAM.

[dcoupar]

Does anyone know where I can get a mastercan version 9 post processor to run my matsuura mill that has a yasnac mx1 controller?

You might try here:

http://www.emastercam.com/posts/mpmaster/mpmaster9.php