LinkBack URL
About LinkBacksIm still fighting the fanuc 6mb it is giving me an alarm 010 (a unusable g code was commanded) when trying to give the machine a g43. I am thinking it is a parameter issue. Can anyone point me in the right direction thanks
Im still fighting the fanuc 6mb it is giving me an alarm 010 (a unusable g code was commanded) when trying to give the machine a g43. I am thinking it is a parameter issue. Can anyone point me in the right direction thanks
Last edited by beekeeper; 08-09-2010 at 09:55 PM.
BE NICE TO THE NERDS IN SCHOOL. THEY ONE DAY MAY BE YOUR BOSS
It appears that G43/G44 are options that are offered in the control but were probably never bought and activated. Post your code for the slight possibility that it is a syntax error. I will also send a PM.
Stevo
Posting Permissions
