G62 on 0-MD

[samu]

Is G62(automatic corner override) an option?
In the machine manual, it's written that to use G62 this function has to be activate by a parameter, wich is this paameter???
I try G62 with no effect. I know that raduis compensation must be on but it doesn't work.

[cnc2149]

The CNC Software Series is displayed for a couple of seconds at power up. The G62 Auto Corner Override is available if you have software package 4 (series 0473).

[samu]

I have this package. Number shown at start-up is 0473-01. So why it does'nt work. Wich parameter have to be set??

[cnc2149]

The 0-D uses functional bits (similar to the 0i CNC controls) to enable features that are already contained in the 0-D software package. Pls send me your PM and I can explain further.

[samu]

I do some test but i have a big problem: machine stop when it reach the deceleration start point. Here is the code:

G0 X0 Y6. G40 G64
G1 G41 D24 Y0 F1000
G62 X100.
Y100.
X0
Y0
M30

prm # 213=1
prm #214=50
prm #215=91
prm #580=20
prm #581=20